Fenix KD-E - Manual (Page 3)

4. Safety instructions for installation

The electric device must only be connected to the 230V AC 50Hz mains; the connection in the
bathroom must conform to ČSN standards.

The electric heating element must not be installed from the top part of the radiator.

Install the radiator in such a way that the heating element is always at the bottom, in a
vertical position.

Always disconnect the radiator from the mains during maintenance, cleaning and if it isn´t in
use.

The electric radiator is produced only for the purpose of heating or drying (to finish the
drying) of textiles.

The electric radiator must not be taken apart, emptied or adapted in any way.

Connection of the product to the mains must comply with general safety requirements as well
as technical standards for the connection of electric appliances. The installed plug has a
lower rating than the product; its removal doesn´t void the warranty.

If you need any assistance, do not hesitate to seek the help of our specialists (tel.
602 745 290).