FiberPlex EF2 - Manual (Page 12)

LightViper EF‐2 Card Specifications
Specifications
• 2 Channel Physical Ethernet Fiber Transport
• Cable runs over 1.25 miles with no loss
• Rugged fiber cable smaller in diameter than standard mic cable
• Single direction physical layer support
• Supports all Ethernet based protocols (eg. CobraNet, HiQ Net, EtherSound,
Aviom, etc) • 9‐24 VDC Power Option
• High quality Neutrik® connectors
• Heavy gauge steel construction
• 1U Rack mount
• Extended range and flexibility means limitless routing options
General Specifications
Latency 100 ns
Operating Temp 0 to +50°C ambient temperature.
Power Requirements Minimum Typical Maximum Unit
AC Voltage Universal
50/60 Hz, IEC Connector 90 - 250 VAC
AC Power - 10 - Watts
DC Voltage 9 12 24 VDC
DC Power - 8 - Watts
Dimensions 12.5" L X 8.75" W X 4 H
1 Rack Unit X 6.5" Deep
Weight 6 lbs
Data Characteristics
Data Rate 10 BASE‐T 10 Mbps
100 BASE‐T 100 Mbps
Line Encoding 10 BASE‐T Manchester
100 BASE‐T MLT3 (Multi Level Transition 3)
Interface
Connector
RJ‐45 (Ethercon™)
Optical Characteristics
Standard Fiber Size Max
Distance
Wavelength Output
Power
Receiver Sensitivity Loss Budget
10BASE‐FL multimode 62.5/125 μm 2 km 1300 nm ‐18 dBm ‐30 dBm 12 dB
100BASE‐FX multimode 62.5/125 μm 2 km 1300 nm ‐18 dBm ‐30 dBm 12 dB
singlemode 9/125 μm 20 km 1300 nm ‐15 dBm ‐30 dBm 15 dB
Optical Fiber
Installation Tension Operating Tension Min Bend Radius Crush Resistance Weight
400 lbs 130 lbs 3.7" 228 lb/in2 19 lbs / 1000'
Attenuation Bandwidth Numerical Aperture System Optical Data Rate System Operating Distance
1 dB/Km @1300 nm 500 MHz/Km @ 1300 nm 0.275 122 Mbs 2 Km (1.25 mi)