Fire Magic 3592 Ice Maker - Manual (Page 5)

5 NO.L-C2-31008 REV 1 - 0812231259
CARE AND MAINTENANCE
CLEANING
• Turn the switch control to OFF position, unplug the ice maker and remove the bucket.
• Wash the inside with a warm water and baking soda solution. The solution should be about 2
tablespoons of baking soda to a quart of water.
• Wash the bucket with a mild detergent solution.
• The outside of the ice maker should be cleaned with mild detergent and warm water.
• The stainless steel components of the door should be cleaned with stainless steel cleaner.
• The condenser coils should be vacuumed when they are dusty or dirty.
CAUTION: FAILURE TO UNPLUG THE ICE MAKER PRIOR TO CLEANING, MOVING, OR
SERVICING COULD RESULT IN ELECTRICAL SHOCK OR PERSONAL INJURY.
POWER FAILURE
Most power failures are corrected within a few hours and should not affect the temperature of your ice
maker if you minimize the number of times the door is opened. If the power is going to be off for a longer
period of time, you should take the proper steps to disconnect your appliance.
VACATION TIME / STORAGE / WINTERIZED (AT FREEZING TEMPERATURES)
1. Shut off the water supply to the ice maker.
2. Disconnect the water supply line at the ice maker valve.
3. Allow the unit to run for an hour or two until all remaining ice cubes have been ejected and all the
water has cycled through and the system and has been made into ice cubes.
4. Disconnect the unit from the main power source.
5. Dry out excess water from the ice maker assembly.
6. Leave the door open at least two inches.
MOVING YOUR ICE MAKER
• Securely tape down all loose items inside your ice maker.
• Turn the leveling screws up to the base to avoid damage.
• Tape the door shut.
• Make sure the ice maker stays in the upright position during transportation.
ENERGY SAVING TIPS
• The ice maker should be located in the coolest area, away from heat sources, and out of the direct
sunlight.