Flowserve MSP - Manual (Page 17)

MSP USER INSTRUCTIONS ENGLISH - 07/14
Page 17 of 35
5.2.2 Lubrication Table
Seal System / Pumped Liquid Quench-Oil General Features
Barrier/Buffer Fluid for
Mech. Seal
Tandem Seal to -40 °C (-40 °F)
Back to back Seal with gascoffer-dam
Conventional back to back Seal
- Raffinated Hydraulic Oil
- Synthetic Oil
- Mixture of water / glykol
ATTENTION:
Do not use Methanol
appr. 10-15 cST at 40°C
(104 °F)
below -40°C (-40 °F)
Pourpoint vaporization
above 80°C (176 °F)
Tandem Seal to -60°C (-76 °F) Ethanol/Propanol
The sequence of the suppliers of the lubricants does not represent any indication of their superiority.
¹ Viscosity at 40 °C (104 °F) in cSt [mm²/s] DIN 5 1562