Flowserve Cast Flex Wedge Gate Valve - Manual (Page 23)

Cast Flex Wedge Gate Valves FCD ADENIM0010-02
23
6.0 DISASSEMBLY
(Continued)
6.2.3 Disc & Stem: (Figs. 13 & 14)
The disc (004) and stem (025) are lifted out of the body together utilizing an eye-bolt in the tapped hole
provided at the end of the stem. Mark the disc and body so that the disc may be reinstalled in its original
orientation. When the disc leaves the body, it is free to slide off the stem T-head. Exercise caution to
prevent damage or injury. Lower the disc onto a flat surface and slide the stem free. Do not lay the disc flat
on a rough or abrasive surface. Protect the seating surfaces from scratching.
Figure 13 Figure 14