Flowserve MT Bevel Gearboxes IOM - Manual (Page 7)

7
Limitorque MT Series FCD LMENIM4201-00 – 06/10
flowserve.com
2.2 Initial Inspection and Recording of Operator Data
c WARNING: Read this Installation, Operation and Maintenance Manual carefully and completely
before attempting to store the gear operator.
Upon receipt of the gear operator, inspect the condition of the equipment and record nameplate
information.
1. Carefully remove gear operator from shipping carton or skid. Thoroughly examine the equipment
for any physical damage that may have occurred during shipment. If damaged, immediately
report the damage to the transport company.
2. A nameplate is attached to each gear operator with the following information:
• Operator Size
• Limitorque Order Number
• Ratio
• Serial Number
Record this information for future reference, for ordering parts or obtaining further information.