Flowserve MX Actuators - Manual (Page 2)

The MX actuator’s 32-character LCD display provides easy-to-read
actuator status, diagnostics, and setup information—in the language you
choose. Once you have set the actuator’s position limits, the unit will be
ready for normal operation. The screen message will indicate the valve
position as a percentage of the valve opening. Full open is expressed as
100% OPEN
and full close is expressed as 0% OPEN.
Factory Settings
The MX actuator can be configured with the parameters that you require in
the field. The calibration of position limits are addressed in this document.
If full valve data was not provided when ordering, or if changes to the
default settings are needed, see Bulletin LMENIM2306, Installation and
Operation for MX-05 through MX-140, for complete instructions.
Before You Begin
Experience In Motion
USER INSTRUCTIONS
Installation
Operation
Maintenance
MX Electronic Actuator
FCD LMENIM2306-00 – 08/05