Flowserve NRG16-12 - Manual (Page 13)

3
Important notes
■
For the approval of the boiler standpipe the relevant regulations must be observed.
■
For typical installation examples refer to page 4.
■
When mounting the electrode laterally make sure that the inclination angle does not
exceed 45° and that the length of the electrode rod is limited to 000 mm. Fig. 12
■
If the electrode is installed outdoor, it must be provided with a weather-proof cover
supplied by GESTRA.
Tools
■
Open-end spanner A. F. 3
■
Open-end spanner A. F. 36
■
Scriber
■
Hacksaw
■
Flat file, cut 2
Installation
– continued –