Flowserve DK 45 - Manual (Page 7)

7
Name plate / marking
Technical Data
Corrosion resistance
The trap body must not be subjected to sharp increases in pressure.
The dimensional allowances and additives for corrosion reflect the latest state of technology.
Sizing
When used for its intended purpose, the safe functioning of the equipment will not be impaired by
corrosion.
The temperature/pressure limit is indicated on the trap body. For more information see GESTRA
technical documents such as data sheets and Technical Information.
According to EN 9 the type and design must be specified on the name plate and trap body.
■
Name/logo of the manufacturer
■
Type designation: DK 45
■
Pressure rating PN
■
Marking according to ATEX: The equipment is not Ex marked.
■
Material number
■
Max. temperature
■
Max. pressure
■
Flow direction
■
Stamp on name plate, e. g. specifies the manufacturing year and quarter,
(in this case the  st quarter 005)
1
05
Fig. 1
Nominal size
Marking
DK 45
MADE BY GESTRA
PN 40
TMA 400 °C
at 23,1 bar
DN