Flowserve ER 50-1 User Manual
Page 4
4
Important Notes
Danger
When loosening the electrode steam or hot water might escape.
This presents the danger of severe scalds to the whole body.
Before removing the electrode make sure that the boiler pressure is zero bar.
The electrode becomes hot during operation. Touching the hot equipment presents the
risk of severe burns to hands and arms. All installation and maintenance work must only
be performed when the equipment is cold.
Safety note
The equipment must only be installed and commissioned by qualified and competent staff.
Retrofitting and maintenance work must only be performed by qualified staff – who through adequate
training – have achieved a recognised level of competence.
Attention
The name plate specifies the technical features of the equipment. Note that any piece of
equipment without its specific name plate must neither be commissioned nor operated.
Usage for the intended purpose
The level electrodes ER 50- and ER 56- are designed for signalling liquid levels.
ATEX (Atmosphère Explosible)
According to the European Directive 94/9/EC the equipment must
not be used in potentially explosive
atmospheres.