Installation – Flowserve PRS 9 User Manual
Page 9
Advertising
9
Attention
To provide sufficient ventilation, ensure a minimum spacing of 20 mm
between adjacent units.
Installation
Design “c” / “d”
1. Install the guide rails and the screw-type connector in the 19" magazine.
2. Introduce the 19" slide-in unit onto the guide rails until it hits the stop.
3. Tighten the fixing screws .
J
Tools
■
Screwdriver for slotted screws, size 5, completely insulated according to VDE 0680.
Advertising