Technical data, Test, Fig. 1 – Flowserve NRGS 11-2 User Manual
Page 7
7
Corrosion resistance
Provided that the equipment is used for its intended purpose, its safety is not impaired by
corrosion.
Sizing
The body must not be subjected to sharp increases in pressure. Welds and flanges of the electrode
are designed to withstand dynamic loading (bending and alternating stress). The dimensional
allowances for corrosion reflect the latest state of technology.
Technical Data
continued
Name plate / marking
NRGS 16 - 2
NRGS 11 - 2
115/230 V
24 V
50 / 60 Hz 5VA 0,5 / 10 µS/cm
TÜV . WR/WB.
02-392
G 1
1.4571
PN 40
PN 6
250 V ~ T 2,5 A
Vor Öffnen des Deckels
Gerät freischalten!
Betriebsanleitung
beachten!
Before removing cover
isolate from power supplies
See installation instructions!
Avant d'ouvrir le couvercle
dèconnecter complètement
l'appareil!
Voir instructions de
montage!
TEST
ENTRIEGELN
RESET
DESENCLENCHER
6 bar ( 87psi)
159°C (318°F)
32 bar (464psi)
238°C (453°F)
Tmax
70°C
(133°F)
IP 65
Pmax
Tmax
GESTRA AG
D-28215 Bremen
GB Reg. Design 2 053 113
US Pat. 5 719 342, Design 383 403
Fig. 1