Wiring – Flowserve NRGS 11-1 User Manual
Page 13
Advertising
13
■
Fuse supply cables with T 250 mA.
■
The connection of the switchpoints 2 and 3 must be provided on site
(pump contactor, auxiliary relay)!
Tools
Attention
Wiring
– continued –
Fill Control
■
Screwdriver for cross head screws, size 1
■
Screwdriver for slotted screws, size 2.5; completely insulated according
to VDE 0680
■
Open-end spanner 17 mm A. F. to DIN 894
Discharge Control
Fig. 9
Fig. 10
Mains
Mains
LW
Advertising
This manual is related to the following products: