Flowserve TRG 5-6x - Manual (Page 4)

4
Important Notes
Usag e for the intended purpose
Use temperature sensors TRG 5-63, TRG 5-64, TRG 5-65, TRG 5-66, TRG 5-67 and TRG 5-68 only in con-
junction with temperature transmitter TRV 5-40 for measuring temperatures.
The equipment must only be used within the admissible pressure and temperature ratings.
Any type of use differing from the usage described above must be considered as improper. The resulting
risk will have to be borne by the user alone. The manufacturer hereby expressly rejects any claims for any
damage resulting from improper usage.
Safety note
The equipment must only be installed and commissioned by qualified and competent staff. Retrofitting and
maintenance work must only be performed by qualified staff who - through adequate training - have
achieved a recognised level of competence.
The temperature sensors TRG 5-63 or TRG 5-64 are screwed into vessels or pipes. When
loosening the temperature sensor steam or hot water might escape!
This presents the risk of severe scalding all over the body!
Dismantle the temperature sensor only if the vessel pressure is verified to be 0 bar.
The temperature sensor becomes hot during operation. Touching the hot equipment
presents the risk of severe burns to hands and arms. All installation, removal and mainte-
nance work must only be performed when the system is cold.
Classification pursuant to article 1 of the Pressure Equipment Direc tive (PED)
ATEX (Atmosphère Explosible)
According to the European Directive 94/9/EC the equipment must not be used in explosion risk areas.
Category IV
Designation Safety accessory
CE marking CE 0525
Dange r