D-Link DI-604 - Manual (Page 13)

-13-
Static IP Address
If you selected Static IP Address, you will see the following page.
Enter in the IP address
information provided to you
by your ISP. You will need to
enter in WAN IP Address,
WAN Subnet Mask, WAN
Gateway, and Primary DNS.
Click Next
PPPoE
If you select PPP over Ethernet (PPPoE), you will see the following
page.
Enter in the username and
password provided to you
by your ISP.
Enter in the Service Name
if your ISP uses a Service
Name for the PPPoE
connection.
Click Next
NOTE: Please be sure to remove any existing PPPoE client
software installed on your computers.