D-Link DI-604 - Manual (Page 18)

-18-
HOME > WAN > PPPOE
Choose PPPoE (Point to Point Protocol over Ethernet) if you’re ISP uses PPPoE
connection. Your ISP will provide you with a username and password. This option
is typically used for DSL services. Select Dynamic PPPoE to obtain an IP address
automatically for your PPPoE connection. Select Static PPPoE to use a static IP
address for your PPPoE connection.
Dynamic PPPoE: PPPoE connection where you will receive an IP
address automatically from your ISP
Static PPPoE: PPPoE connection where you have an assigned (static) IP
address
User Name: Your PPPoE username provided by your ISP
Password: Your PPPoE password provided by your ISP
Retype Password: Re-enter PPPoE password
Service Name: Enter the service name provided by your ISP. (optional)
IP Address: This option is only available for Static PPPoE. Enter in the
static IP address for the PPPoE connection.
Primary DNS Address: Primary DNS IP provided by your ISP
Secondary DNS Address: optional
Please be
sure sure to
remove any
existing
PPPoE Client
Software
installed on
your
computers.
1492