D-Link DI-604 - Manual (Page 58)

-58-
Networking Basics
Assigning a Static IP Address
• Input your IP address and
subnet mask. (The IP
Addresses on your network
must be within the same range.
For example, if one computer
has an IP Address of
192.168.0.2, the other
computers should have IP
Addresses that are sequential,
like 192.168.0.3 and
192.168.0.4. The subnet
mask must be the same for all
the computers on the network.)
• Input your DNS server
addresses. (Note: If you
are entering a DNS server,
you must enter the IP Address of the Default Gateway.)
The DNS server information will be provided by your ISP (Internet Service Provider.)
ghlight Internet
rotocol
TCP/IP)
• Select Use the
following IP address
in the Internet
Protocol (TCP/IP)
Properties window
(shown below.)
DWL-650+ Wireless Cardbus Adapter
• Highlight Internet
Protocol(TCP/IP)
• Click Properties
192 168 0 1
192 168 0 1