Fluke Biomedical TNT 12000 DoseMate - Manual (Page 5)

TNT 12000 DoseMate English Quick
Reference Guide
Page 7
Select an Ion Chamber
To set an ion chamber and its calibration factor in to the DoseMate:
1. Push  or  to highlight the IC button in the MEASUREMENT
screen.
2. Push  to show the ION CHAMBER SETUP screen in Figure 4
in the display.
fct241.png
Figure 4. Ion Chamber Setup Screen
3. Push  or  to highlight an ion chamber ID in the left frame and
push . The cursor moves to the right frame.
4. Push  or  to highlight a calibration factor and push . The
cursor moves to the Continue button.
5. Push  to return to the MEASUREMENT screen.
To learn more about ion chambers and calibration factors, see the How to
Use the Dosimeter section in the TNT 12000 Users Manual.