Fluke Biomedical TNT 12000 DoseMate - Manual (Page 6)

TNT 12000 DoseMate English Quick
Reference Guide
Page 8
Set the Measurement Mode
To set the measurement mode:
1. Push  or  to highlight the Mode button at the bottom of the
measurement screen. Push  to show the MODE SETUP
screen in Figure 5.
fct250.png
Figure 5. Mode Setup Screen
2. Push  or  to highlight the Mode combo box and push  to
open the dropdown list.
3. Push  or  to highlight the Dose mode and push .
4. Push  to highlight the Automatic Reset checkbox and push
 to check the box.
5. Push  to highlight the Continue button and push  to return
to the MEASUREMENT screen.
To learn more about measurement modes, see the Measurement Mode
Selection section in the TNT 12000 Users Manual.