Formax FD 1502 Plus - Manual (Page 12)

INSTALLING OPTIONAL FLOW STRAPS
Figure 9
Figure 11
3. With strap in place, press clip down over strap. (Figure 11)
4. Figure 12 shows strap and clip in place.
NOTE: Clip must be removed before moving strap to a different location.
Figure 12
Figure 13
5. Repeat process on other side. Figure 13 shows two straps in place.
Flow
Strap
1. Optional Flow Straps can be used when processing thicker paper stock. To install, fold over 1/2 inch of
strap. (Figure 19).
2. Place strap over static brush in appropriate location. (Figure 10)
NOTE: Straps should not be placed where they will interfere with the conveyor belts or the weighted out-
feed tires, (see Figure 13).
Figure 10
Flow
Strap
8