Formax 6302 Series - Manual (Page 16)

14
3.6 Sealing Envelopes
Switch the envelope sealing ON or OFF.
1. Lift the handgrip to open the top cover.
2. Shift the blue handle A towards to disable
the envelope sealing or towards to enable
the envelope sealing.
3. Close the top cover.
When the sealing of the envelopes is enabled, the
sealing liquid reservoir must be filled.
4. Open the front cover A.
5. Fill the reservoir B to the “Max” level indication
with sealing liquid.
6. Close the front cover A.
Before starting the job, wait approximately 5
minutes for the brushes to moisten.
3.7 AutoSet TM
The AutoSet TM feature automatically adjusts all
machine settings.
When AutoSetTM is started, the machine will pick one sheet from each filled feeder.
The picked documents will be folded (if necessary) and inserted into an envelope.
Using AutoSet
TM
1. Load envelopes.
2. Make sure there is sufficient sealing liquid in the
sealing liquid reservoir. If the reservoir has just
been filled, wait approximately 5 minutes for the
brushes to moisten. See “Sealing Envelopes” on
page 14.
3. Load the documents face up and leading.
4. From the Main Menu 1/2 press r
A
A
B
Test run
other job
JOB 1
Counters
AutoSet
Total:
0
MAIN MENU 1/2
AutoSet