Formax FD 8904B - Manual (Page 17)

6. Take the plastic bag at the bottom of the press and then pull it carefully down from the outlet opening
7. Lift the plastic bag at its opening, so that you can tip over the bale
8. Fold the edges to the middle and seal the bag with adhesive tape
9. Attach a new plastic bag (see section 7.1)
10. Swivel the counter plate upwards again
11. Open the bailer Inspection/ safety over, remove the cardboard underneath the bail and empty the particles
that may have fallen out back into the bailer.
12. Lock hydraulic door.
13. Press the “Automatic operation” key on the combination press
• the “Automatic operation” symbol lights up
• the press ram moves into starting position
• the baler is ready for operation again
14