Formax FD 404A1 Operator / Parts Manual - Manual (Page 5)

DESCRIPTION
FUNCTION
The FD 404A1 High-Capacity Air Jogger aligns and dries printed
sheets in a single process while reducing static electricity.
Variable vibration speed and air pressure controls combine to
reduce jogging time, allowing press sheets and digital printouts
to be air-dried immediately.
1
SPECIFICATIONS
Variable Vibration Speed: Up to 3,000 vpm
Variable Air Control:
Up to 29,000 rpm
Bin Size: 3.75” D x 20.375” W
Media Size: 5” x 7” Min up to 12” x 18” Max
Sheet Capacity: Up to 940 sheets 20#
Dimensions: 21” W x 18” D x 54” H
Weight: 100 lbs.
Voltage: 110V/120V, 50/60 Hz
1. Check package for shipping damage. If there is shipping damage, do not discard the box.
2. Remove the machine and packed components from the box, includes power cord and manual.
UNPACKING
SAFETY PRECAUTIONS
• Place the machine on a level and stable surface, to prevent it from falling over and causing personal injury
or damage to the machine. Avoid locations with direct sunlight, excessive dust and/or dirt, chemicals, salt or
vibrations.
• Connect the power plug to a grounded outlet and do not use any other voltage other than specified on the serial
plate. Do not share a wall outlet with another piece of equipment as overheating could occur. Be sure to route the
power cable to the wall outlet in a way which will prevent people from tripping over it.
• When cleaning the machine, turn off the power first, then unplug from the wall outlet.
• Do not dismantle or attempt to repair the machine. Do not lubricate or apply grease to the machine. Call for
service.