Foxconn 760GXK8MC RAID - Manual (Page 18)

Serial ATA RAID User’s Guide
3. You will have two selections to create a RAID 1 array. The default
value is <1>. If you select <1>Auto Create, you can create a RAID 1
array faster and easier. The result after creating will be shown on step 5.
Besides, you also can select <2>Manual Create, see following steps.
4. Use <↑> <↓> to select disk , and press <Enter> to select disk, <Q> to
exit. When you press <Enter> on the disk you wanted, the RAID Type
will be changed from Single to RAID 1. The same as RAID 0, the disk
you select first will be the SOURCE disk.
15