Step 1. hardware setup, Hard disk drives setup – Foxconn 760GXK8MC RAID User Manual
Page 7
Serial ATA RAID User’s Guide
Step 1. Hardware Setup
Hard disk drives setup
The South Bridge SiS964 SATA controller only supports two Serial ATA
hard drivers.
For RAID 0 (Striping array)
z Any of 2 SATA Hard disks would make a stripe system.
z The South Bridge SiS964 SATA controller only supports combination 6.
NOTE: Storage Capacity: the number of hard disk drives times the capacity
of the smallest drive in the disk array
Working Speed: the speed of the lowest drive in the disk array
For RAID 1 (Mirror array)
z Any of 2 SATA Hard disks would make a mirror system.
z The South Bridge SiS964 SATA controller only supports combination 6.
NOTE: Storage Capacity: the capacity of the smallest drive in the disk array
Working Speed: the speed of the lowest drive in the disk array
For JBOD (Spanning array)
z Any of 2 SATA Hard disks would combine to a JBOD system.
z The South Bridge SiS964 SATA controller only supports combination 6.
NOTE: Storage Capacity: the number of hard disk drives times the capacity
of the smallest drive in the disk array
Working Speed: the speed of the lowest drive in the disk array
4