Foxconn FlamingBlade - Manual (Page 11)

4
1
1 x Power fan header (3-pin)(NB_FAN1)
1 x IDE connector (Controlled by JMicron JMB363, for Flaming Blade/
Controlled by JMicron JMB368, for Flaming Blade GTI)
6 x SATA connectors
2 x USB 2.0 connectors (Supporting 4 x USB devices)
Back Panel 1 x PS/2 Keyboard port
Connectors 1 x Optical S/PDIF out connector
(Flaming Blade) 1 x Clear CMOS button
8 x USB 2.0 ports
2 x RJ-45 LAN ports
2 x External SATA ports (Controlled by JMicron JMB363)
8-channel audio ports
Back Panel 1 x PS/2 Keyboard port
Connectors 1 x Optical S/PDIF out connector
(Flaming Blade GTI) 8 x USB 2.0 ports
1 x RJ-45 LAN port
8-channel audio ports
Hardware Monitor System voltage detection
CPU/System temperature detection
CPU/System fan speed detection
CPU/System overheating shutdown
CPU/System fan speed control
PCI Express x16 Support 8GB/s (16GB/s concurrent) bandwidth
Low power consumption and power management features
PCI Express x1 Supports 500MB/s (1GB/s concurrent) bandwidth
(Only for Flaming Blade) Low power consumption and power management features
Green Function Supports ACPI (Advanced Configuration and Power Interface)
Supports S0 (normal), S1 (power on suspend), S3 (suspend to RAM), S4
(suspend to disk), and S5 (soft - off)
Bundled Software AEGIS PANEL
FOX LiveUpdate
FOX LOGO
FOX DMI
Operating System Supports for Microsoft® Windows® Vista/XP
Form Factor ATX Form Factor, 12 inches x 9.6 inches (30.5cm x 24.4cm)
This motherboard does not support Windows® 2000.
CA
UT
IO
N
!