Foxconn FlamingBlade - Manual (Page 46)

39
3
Hardware Monitor
► Shutdown Temperature
This item is used to set the system temperature upper limit. When the temperature exceeds
the set value, the system will shut down automatically.
► Core i7 CPU / X58 IOH / System Temperature
These items show the Core i7 CPU / X58 IOH / System temperature detected automatically by
the system.
► CPU Core / CPU VTT(Uncore) / DDR3 Memory / X58 IOH Core / BIOS Battery 3V Voltage
& PSU 12V / 3.3V Rail
These items show the current system voltages detected automatically by the system.
► CPU Fan Control
This item is used to control the CPU fan. Configuration options are:
[Full Speed], [By Duty-Cycle] and [Smart Fan].
► CPU Fan Duty Cycle
It allows you to control the CPU fan by using Duty-Cycle. You can input a value ranging from 0
to 99.
► CPU Fan Speed
This item shows the CPU fan speed detected by the system.
► NB Fan Control
This item is used to control the NB fan. Configuration options are:
[Full Speed, [By Duty-Cycle] and [Smart FAN].
► NB Fan Duty Cycle
It allows you to control the NB fan by using Duty-Cycle. You can input a value ranging from 0
to 99.
► NB Fan Speed
This item shows the NB fan speed detected by the system.
► System Fan Control
It allows you to control the system fan. Configuration options are:
[Full Speed], [By Duty-Cycle] and [Smart Fan].
Phoenix - AwardBIOS CMOS Setup Utility
Hardware Monitor
Shutdown Temperature Disabled Item Help
Core i7 CPU Temperature 35○C
X58 I0H Temperature 35○C Menu Level ►
System Temperature 37○C
CPU Core Voltage 1.21V
CPU VTT (Uncore) Voltage 1.18V
DDR3 Memory Voltage 1.63V
X58 IOH Core Voltage 1.12V
PSU 12V Rail 11.77V
PSU 3.3V Rail 3.34V
BIOS Battery 3V Voltage 3.07V
CPU Fan Control Smart Fan
x CPU Fan Duty Cycle 90%
CPU Fan Speed 2626 RPM
NB Fan Control Smart Fan
x NB Fan Duty Cycle 90%
NB Fan Speed 0 RPM
System Fan Control Smart Fan
x System Fan Duty Cycle 90%
↑↓→←:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F7:Optimized Defaults
Disabled