Foxconn FlamingBlade User Manual
Page 55
48
3
► DIMM1/2/3 Vref CA (Address) & DIMM1/2/3 Vref DQ (Data)
CA (Command-address) and DQ (Data line) reference voltage is reference DRAM voltage,
the actual reference voltage will be DRAM voltage multiply this item value.
********* Chipset Voltages *********
► X58 IOH Core Voltage
Isolated power for X58 IOH Core, default voltage is 1.1V.
Warning: Adjusting the voltage beyond the IOH default core voltage could result in damage to
the IOH.
► X58 IOH VCCA 1.1V
Isolated power for IOH 1.1V VCCA, default voltage is 1.108V.
Warning: Adjusting the voltage beyond the IOH default 1.108 VCCA voltage could result in
damage to the IOH.
► X58 IOH VCCA 1.5V
Isolated power for IOH 1.5V VCCA, default voltage is 1.506V.
Warning: Adjusting the voltage beyond the IOH default 1.506 VCCA voltage could result in
damage to the IOH.
► ICH10 SB Voltage
Isolated power for ICH core voltage, default voltage is 1.506V.
Warning: Adjusting the voltage beyond the ICH default voltage could result in damage to the
ICH.