Owner’s manual, Product identification, Air for combustion and ventilation – Desa CGN10R User Manual

Page 3

Advertising
background image

3

103549

OWNER’S MANUAL

Heater
Cabinet

Grill
Guard

Burners

Front
Panel

Figure 1 - Vent-Free Natural Gas Heater

Control Knob

Piezo Ignitor Button

PRODUCT
IDENTIFICATION

Continued

AIR FOR
COMBUSTION AND
VENTILATION

WARNING: This heater shall

not be installed in a confined
space unless provisions are pro-
vided for adequate combustion
and ventilation air. Read the fol-
lowing instructions to insure
proper fresh air for this and other
fuel-burning appliances in your
home.

Today’s homes are built more energy effi-
cient than ever. New materials, increased
insulation, and new construction methods
help reduce heat loss in homes. Home own-
ers weather strip and caulk around windows
and doors to keep the cold air out and the
warm air in. During heating months, home
owners want their homes as airtight as pos-
sible.

While it is good to make your home energy
efficient, your home needs to breathe. Fresh

air must enter your home. All fuel-burning
appliances need fresh air for proper com-
bustion and ventilation.

Exhaust fans, fireplaces, clothes dryers, and
fuel burning appliances draw air from the
house to operate. You must provide ad-
equate fresh air for these appliances. This
will insure proper venting of vented fuel-
burning appliances.

PROVIDING ADEQUATE
VENTILATION

The following is excerpts from National
Fuel Gas Code. NFPA 54/ANSI Z223.1,
Section 5.3, Air for Combustion and Venti-
lation.

All spaces in homes fall into one of the three
following ventilation classifications:

1. Unusually Tight Construction; 2. Uncon-
fined Space; 3. Confined Space.

The information on pages 3 through 5 will
help you classify your space and provide
adequate ventilation.

Unusually Tight Construction

The air that leaks around doors and win-
dows may provide enough fresh air for
combustion and ventilation. However, in
buildings of unusually tight construction,
you must provide additional fresh air.

Unusually tight construction is de-
fined as construction where:
a. walls and ceilings exposed to the

outside atmosphere have a con-
tinuous water vapor retarder with a
rating of one perm (6x10

-11

per pa-

sec-m

2

) or less with openings

gasketed or sealed

and

b. weather stripping has been added

on openable windows and doors
and

c. caulking or sealants are applied to

areas such as joints around win-
dow and door frames, between sole
plates and floors, between wall-
ceiling joints, between wall panels,
at penetrations for plumbing, elec-
trical, and gas lines, and at other
openings.

If your home meets all of the three criteria
above, you must provide additional fresh
air. See Ventilation Air From Outdoors,
page 5.

If your home does not meet all of the three
criteria above, proceed to page 4.

Confined and Unconfined Space

The National Fuel Gas Code (ANSIZ2123.1,
1992 Section 5.3) defines a confined space
as a space whose volume is less than 50
cubic feet per 1,000 Btu per hour (4.8 m3 per
kw) of the aggregate input rating of all
appliances installed in that space and an
unconfined space as a space whose volume
is not less than 50 cubic feet per 1,000 Btu
per hour (4.8 m3 per kw) of the aggregate
input rating of all appliances installed in that
space. Rooms communicating directly with
the space in which the appliances are in-
stalled*, through openings not furnished
with doors, are considered a part of the
unconfined space.

* Adjoining rooms are communicating only
if there are doorless passageways or ventila-
tion grills between them.

Advertising
This manual is related to the following products: