Foxconn P4M800P7MA-ERS2 - Manual (Page 18)

Chapter 2 Installation Instructions
11
Installation of DDR/DDR2 Memory
1. There is only one gap in the middle of the DIMM slot, and the memory
module can be fixed in one direction only. Unlock a DIMM slot by pressing the
module clips outward.
2. Align the memory module to the DIMM slot, and insert the module vertically
into the DIMM slot.
3. The plastic clips at both sides of the DIMM slot will lock automatically.
Warning :
104 Pins 80 Pins
128 Pins 112 Pins
DDR
memory
DDR2
memory
Be sure to unplug the AC power supply before adding or removing
expansion cards or other system peripherals, especially the
memory devices, otherwise your motherboard or the system
memory might be seriously damaged.
PDF 文件使用 "pdfFactory" 试用版本创建 www.fineprint.com.cn