Daewoo DP - 42 GP - Manual (Page 13)

14
Installation Instructions
When Using the Stand
(Assembled Picture)
M5 SCREWS
Take out the STAND from the
package. 1
Engage the assembled stand
with 4 screws (M5) enclosed. 3
Smoothly fit the Stand to the
Plasma Display Panel 2
Erect the Display
4
* When installing PDP Main Unit, be sure it is done by more than 2 professionals.
* For detailed installation information, refer to the User’s Manual, “STAND”.
Separate the Protective Caps.
(They are used when using for
wall mounting, so store them.)