Connect the pc to the pdp, Connecting pc – Daewoo DP - 42 GP User Manual
Page 15
Connecting PC
• DAEWOO PLASMA
supports resolution
of VGA, SVGA,
XGA, SXGA, UXGA.
• Before connecting a
PC to the PDP, be
sure to adjust the
resolution of PC.
• This product is not
supported by Plug
and Play, so select
Standard Monitor
when setting PC
monitor.
Connecting PC
16
Connect the PC to the PDP.
• Prepare the PC cable (D-sub 15pin) and
the PC audio cable(Sold separately).
• Connect the PC(Output) to the
PDP(Input) as shown below.
2
Before connecting to the PDP, set the
resolution of the PC.
• Go to SETUP-CONTROL PANEL-DISPLAY PROPERTIES in Window
Screen.
• Choose the SETTINGS tab in the DISPLAY Menu.
• In the SETTINGS Menu, select 640x480 or 800x600.
1
PC INPUT
L
R
AUDIO
PC INPUT
RS-232C PORT
SPEAKER(8 Ohms)
R
L
L
R
AUDIO
EXTERNAL PORT
RGB/COMPONENT INPUT
H
V
B/Pb
R/Pr
G/Y
AUDIO
R
L
15 PIN D-sub
PC
Audio