Daewoo DP - 42 GP - Manual (Page 16)

17
Input Select
INPUT
SELECT
• Select [PC] by pressing the INPUT
SELECT button of the Remote Control or
PDP unit.
• Each time you press the INPUT SELECT
button, a different input mode appears. The
sequence is as follows:
PC --> Component 1(RGB H/V) -->
Component 1.
Enjoy Dynamic Ultra Screen Monitor by
Using PC’s Keyboard or Mouse.
4
5
Press the Power button.
• Turn on the PDP and the PC.
3
NOTES:
The resolution of the PC monitor is best at 640 x 480 (VGA).
If there is a [Vertical Frequency]setting menu in the [Display]
Menu of the PC, adjust the frequency to 60Hz.
If the PC resolution is too high, it may be hard to read letters.
Select a suitable resolution.
PC Component1(RGB H/V)
Component1