Gasboy PC for Windows Upgrade Procedure User Manual
C36093 Rev. 09/11/03
PC/CFN UPGRADE PROCEDURE
UPGRADING FROM PC/CFN VERSION 2 TO PC/CFN VERSION 3
To upgrade PC/CFN and related files the following steps should be followed:
Save Autopoll Configuration
If you have an autopoll configuration that has not been saved, save it now. From the CommLink Menu, choose
Setup/Enable Autopoll. Click the Save button to save the current configuration. NOTE: Autopoll configurations
cannot be saved while autopoll is enabled. If autopoll is enabled, disable it before saving your configuration.
Make A Backup
Make a backup of the current PC/CFN database on a disk separate from the normal backup. (Utilities/PC
Database/Backup). Make absolutely sure of your backup!
Print A PC System Config Report
Print a PC System Configuration report from PC/CFN (Reports/Standard/PC System Configuration). This will be
used later for the PC/CFN setup.
Record User Settings
Fill in the following information to be used later in the upgrade procedure.
System Password Protection
ON / OFF (Circle one)
Manager Password Protection ON / OFF (Circle one)
Manager Selection Timeout
ON /OFF (Circle one)
Setup/Fuel System Types
Use cards other than club cards?
Setup/Default Comm Parameters Screen
Automatically Generate Rawtrans File
PC/Comm DOS V4.992 and above
PC/Comm DOS below V4.992
PC/Fuel Transfer File Format
(Fuel Package only)
PC/Fuel DOS V6
PC/Fuel DOS V7