GBS Elektronik MCA-527 - Manual (Page 62)

MCA527
Parameter MCA527 MCA527L MCA527OEM
Mechanical
Dimension
18 164x111x45 mm 136x60x18 mm
Weight 840g 19 720g 19 52g
Environmental
Operational Temperature
Range
0°C to 50°C with batteries
-20°C to 50°C with stationary power
supply -20°C to 50°C
Humidity ≤90%, non-condensing
Protection Class IP42 IP00
1 All outputs are continuously short circuit proof. The total primary power must not exceed 2W!
2 Output polarity depends on module inserted (positive or negative)
3 HV3000 and HV1200 high voltage modules can be also used with limitations.
4 HV3600 and HV3000 high voltage modules can be also used.
5 Available at pin 5 of the D-SUB9 connector. Compatible to Ortec, Canberra and DFG HPGe detectors.
6 Available at pin 3 of the D-SUB9 connector. Can be used to connect different sensors.
7 Available at pin 5 of the D-SUB9 connector. Can be used to connect different sensors.
8 Available at pin 8 of the D-SUB9 connector. Can be used to connect external temperature sensors.
9 Temperature is shown in diagnostics menu and is saved with the spectrum.
10 If enabled, it feeds a constant current into pin 5 of the D-SUB9 connector. The useable voltage range
allows to measure resistance in the range of 0 Ω to 8k Ω .
11 Works down to 3.2V but RS232 and USB interfaces are not functioning.
12 RS232
ext
means the interface RxD
ext
/ TxD
ext
which is a true RS232 transceiver.
13 Maximum data rate depends on load and cable quality. Real data rates may be significant lower!
14 RS232
extTTL
means the interface RxD
extTTL
/ TxD
extTTL
which is a logic level RS232 transceiver. Because
both signals are inverted internally, any externally connected UART must invert both signals, too!
15 Referred to GND
ext
.
16 Available as option.
17 Possible for custom specific version.
18 Without connectors.
19 Including batteries and high voltage module.
62