Geist SA2-003 - Manual

SwitchAir 2U Network Switch Cooling
Effective cool air delivery for front of rack mounted multi
RU switches universal for side intake switch types
Side Channel Air Delivery
Rack Front
Network Switches
SA2-003
SwitchAir Intake
Rack Rear
Placing core network switches in an enclosed rack is a preferred
design but it can be a challenge to deal with the heat generated by
the devices. Due to design constraints and equipment density, intake
air is typically at the sides of the switch chassis with heat exhaust out
the rear or opposite side of the switch.
SwitchAir 2U ensures side intake switches are able to receive the
required cool air from outside the rack. SwitchAir delivers air to the
switch via the SwitchAir cold air curtain. SwitchAir 2U works with
switches having side intake with multiple exhaust confi gurations.
SA2-003 Specifi cation
Rail Depth
26 5/8” to 29 5/8”
Chassis Depth
9”
Channel Depth
26”
Input Power / Indicator
90-264 VAC 50/60 Hz
15 watts
LED Power Indicator
Input Connector
C14 Input
Input Cord
Order separately
Airfl ow
47 CFM
Switch Intake/Exhaust
Side/Side
Safety / Approvals
UL, cUL 60950, CE, FCC, Class A
Warranty
2 Years
Why Choose Opengate?
• Stabilize your switch intake air
temperature to within a few degrees
of the rack front intake air temperature
• Installs in minutes and works with
most side and rear intake network
switches
• SwitchAir 2U can be installed while
network switch is operational
• Single input cord runs on any
voltage and continually delivers
required air
• Opengate by Geist allows rapid
return on investment—typically less
than three months
10002501