Geist Leak Detection Kit - Manual

Leak Detection Kit quick setup guide (rev.131111B-GD) 1
LEAK DETECTION KIT
POWER/ALARM
LD300
LD300
Control Box
Your Leak Detection Kit should include the following items:
+5V power
supply
15ft (3m)
“Leader Cable”
one or more lengths of
orange “Leak Detection
Cable” (quantity and
length(s) of cable(s) will
depend on which kit and
additional cables, if any,
were ordered.)
50ft (16.7m) of 4-
conductor alarm
wire (to connect
LD300 control box to
monitoring unit)
accessory hardware
includes hex key to open
LD300 control box, wall-
mounting hardware, and self-
adhesive J-clips for securing
the sensing cable(s) in place
Terminator Plug
(note: not all kits will
include this; some kits
have one end of the orange
leak-detection cable
permanently terminated,
and do not require a
separate terminator plug)