Genee World GV-34100HD - Manual (Page 7)

Using the features
The visualisers have built-in functions that can be operated either from the control panel buttons or
from the remote control.
4
Button functions on the GV8100HD/9100HD visualiser/remote
POWER Control the visualiser On/Off
Press and hold two seconds to power off
visualiser
Mir Reverse the image
Frz Freeze the image
Neg Display negative image
Title Freeze the top 1/8 of the screen
D./S. Switch between static and dynamic modes
Far/Near Focus far or near
Split Image Split function
Ppw Control the projector On/Standby (with RS232 link)
Pin Projector input signal selection
h & i Move the image up/down
CCD/PC1/PC2 CCD/RGB input signal selection
S-VIDEO/VIDEO Video input signal selection
LAMP Control the arm lights and back light
AUTO To auto adjust white balance and auto
focus
+
T/W
– Increase and decrease the
magnification
B&W Add and remove colour (remote)
Save Temporarily save images to Flash file
(remote)
Recall View saved images (remote)
Rotate 90 o , 180 o , 270 o image rotation (only
available on some models)
XGA Projector type
Text Sharpens image
Red +/- Alter colour balance
Blue +/- Alter colour balance
Bright +/- Alter brightness of image
Scroll h / i Moves camera head
Projector power Control projector if linked
Projector input Input selection
Remarks: Frz, Title, D./S. and Split functions are
only available on PROJECTOR OUT port
with CCD camera models (GV6100,
7100 & 8100) and both PROJECTOR and
USB ports with CMOS camera models
(GV9100 & Elite).
CCD | PC1 | PC2 S-VIDEO | VIDEO
Buttons on the GV4100HD
Buttons
and remotes
may vary
on different
models