Dell PowerEdge T610 - Manual (Page 17)

Dell
PowerEdge T610 Technical Guide 17
Table 4. Power Supply Status
LED Power Supply Status
AC Power is not present
AC Power is present
Fault of any kind is detected
DC Power is applied to the system
↔
Redundant power supply mismatch
(when hot-plugged/swapped)
See the Power Indicator Codes section in the About Your System chapter of the PowerEdge T610
Hardware Owner’s Manual on Support.Dell.com for more information.
4.6 NIC Indicators
See the NIC Indicator Codes section in the About Your System chapter of the PowerEdge T610
Hardware Owner’s Manual on Support.Dell.com for more information.
4.7 Internal Chassis Views
Figure 4 shows the internal view of the PowerEdge T610 server.
Figure 4. Internal Chassis View