Harken C8436 MKIV Jib Reefing & Furling - Manual (Page 4)

HEADSTAY CUT LENGTH
Subtract the following from the headstay
length and cut the stay at that point.
HEADST
AY CUT LENGTH
6.5 mm
Preassembly Headstay Length
ROD COLDHEAD HEIGHT
Make sure the length of coldhead does not
interfere with the drive pin.
Distance between the collet bottom and the
rollpin is 6.5 mm
HEADSTAY CUT LENGTH CHART
Clevis Pin Size 22.2mm 25.4mm
-30 rod (11.1 mm) 185mm —
-40 rod (12.7 mm) — 229mm
4 Nautor MKIV Furling 4/18/07