Harken C8436 MKIV Jib Reefing & Furling - Manual (Page 8)

Place halves of plastic bushings on stay so
hooked part of longer section faces out.
Tip: With foil screw holes up as shown
below, place longer half of isolator
with hook on upper half.
Install trim cap. Place each side over wire.
Push trim cap into foil to start then tap in
using hammer.
Push trim cap into foil to start then tap
in using hammer.
Install trim cap screws.
Assembly Top Foil
8 Nautor MKIV Furling 4/18/07