HiTi P520L - Manual (Page 14)

14
Chapter 4. Installing and operation
Connect the power cord which is conformed to safety regulations below.
◎
Installing
: Make sure to switch off the power of the printer before connecting to
AC power.
: Do not insert or remove the power cord with wet hands. It may cause
the electric leakage.
: Do not damage or make any modification to the power cord. Misusing,
such as putting the heavy items on the power cord, giving a strong pull to the power
cord and twist the power cord may cause the fire and electric shock.
: When moving the printer, make sure to switch off the power of the
printer, remove the power cord in order to have no connection with other devices.
Otherwise, the power cord might be damages and it can cause the fire and electric
shock. Also, it is very likely to fall down caught by the cord.
: For the safety consideration, please remove the power cord from the
printer and AC power if the printer is not to be used for a long time.
4.1 Connect the printer power cord to
the back of P520L (as figure shown) and
AC power receptacle.