Hoefer DQ300 - Manual (Page 18)

•
p10
3.6 Sample Analysis
You can read samples in two reading modes:
Discrete or Continuous.
3.6.1 Discrete Mode
In Discrete Mode, the instrument measures
and averages the fluorescence signal over a
5-second interval.
1
Press the <SET> button.
2
Use the <UP> or <DOWN> button to select the
“Discrete” mode.
3
Press <ENTER>.
4
Insert your sample.
5
Press <READ> button. The result will be displayed at
the top and center of the Home Screen.
6
The top left corner will display “WAIT” for 5 seconds.
Once “WAIT” disappears, another sample reading can
be performed.