Hoefer DQ300 - Manual (Page 19)

•
p11
3.6.2 Continuous Mode
In Continuous Mode, the instrument measures
and averages the fluorescence signal over a
5-second interval for each sample measurement.
The instrument measures the sample repeatedly
for a user defined sample number.
1
Press the <SET> button.
2
Use the <UP> or <DOWN> button to select the
“Continuous” mode.
3
Press <ENTER>.
4
Use the <UP> or <DOWN> button to select a
measurement interval.
5
Press <ENTER>.
6
Use the <UP> or <DOWN> button to select the
number of samples you want to measure.
7
Press <ENTER>.
8
Press <READ> button.
9
The screen will display the setting selected.
Press <ENTER>.