Dell INFINISCALE III M2401G - Manual (Page 3)

M2401G 20Gb/s InfiniBand Blade Switch I/O Module User Manual
Mellanox Technologies Rev 1.8
3
Contents
Contents 3
About this Manual 4
Revision History 5
Chapter 1 Overview 6
1.1 InfiniBand Connectors 7
1.2 Switch Status Lights 7
Chapter 2 Installation and Basic Operation 9
2.1 Installation Safety Warnings 10
2.2 Mechanical Installation 11
2.2.1 Removing an Old Switch From the Chassis 11
2.2.2 Removing a Blank Cover Plate From the Chassis 12
2.2.3 Installing the Mellanox M2401G Switch Into the Dell Chassis 12
2.3 Power Connections and Initial Power On 12
2.4 InfiniBand Cable Installation 13
Chapter 3 Cluster Management and Firmware 14
3.1 Network Management and Clustering Software 14
3.2 Updating Firmware 14
3.2.1 Instructions for Reprogramming Over the InfiniBand Network 14
Chapter 4 Troubleshooting 17
Appendix A Specifications 18
Appendix B Mechanical Drawing 19
Appendix C EMC Certification Statements 20
Appendix D InfiniBand Connector Pinout 22
Appendix E Avertissements de sécurité d’installation 24
Appendix F Installation - Sicherheitshinweise 26