Connect the torch lead, Connect the torch lead -30, Powermax – Hypertherm Powermax45 Service Manual User Manual
Page 60
Advertising
torch setup
3-30
powermax
45
Service Manual
Connect the torch lead
The Powermax45 has a FastConnect system for connecting and disconnecting the hand and machine torches. When
connecting or disconnecting a torch, first power OFF the system. To connect either torch, push the connector into
receptacle on the front of the power supply.
To remove the torch, press the red button on the connector and pull the connector out of the receptacle.
Red button
Advertising
This manual is related to the following products: