Power steering fluid, Power steering fluid -36, When to check power steering fluid – Hummer 2009 H2 User Manual

Page 390: How to check power steering fluid, What to use

Advertising
background image

Power Steering Fluid

See Engine Compartment
Overview
on page 5-14 for
reservoir location.

When to Check Power Steering Fluid

It is not necessary to regularly check power steering fluid
unless you suspect there is a leak in the system or
you hear an unusual noise. A fluid loss in this system
could indicate a problem. Have the system inspected
and repaired.

How to Check Power Steering Fluid

To check the power steering fluid:

1. Turn the key off and let the engine compartment

cool down.

2. Wipe the cap and the top of the reservoir clean.

3. Unscrew the cap and wipe the dipstick with a

clean rag.

4. Replace the cap and completely tighten it.

5. Remove the cap again and look at the fluid level on

the dipstick.

The level should be at the FULL COLD mark. If
necessary, add only enough fluid to bring the level
up to the mark.

What to Use

To determine what kind of fluid to use, see
Recommended Fluids and Lubricants on page 6-13.
Always use the proper fluid.

Notice: Use of the incorrect fluid may damage the
vehicle and the damages may not be covered by
the vehicle’s warranty. Always use the correct fluid
listed in Recommended Fluids and Lubricants
on page 6-13.

5-36

Advertising