Hummer 2009 H2 - Manual (Page 449)

15. Tighten the nuts
firmly in a crisscross
sequence as shown
by turning the wheel
wrench with the wheel
wrench extender
clockwise.
16. When you install the wheel and tire, you must also
reinstall the center cap. Place the cap on the wheel
and tap it into place until it sits flush with the wheel.
Storing a Flat or Spare Tire and
Tools (SUT)
Storing the Flat or Spare Tire
Use the following art and text to help you store the
spare or flat tire back into its proper location when you
are done.
To store the flat or spare tire on the tire carrier:
1. Close the tire carrier. See Tailgate/Spare Tire
Carrier on page 2-16 for tire carrier operation.
2. Place the flat or spare tire onto the tire carrier with
the outside of the wheel facing you.
3. Reinstall the wheel nuts holding the spare or flat
tire to the tire carrier. Tighten the nuts by hand.
5-95