Hyundai 2013 Genesis - Manual (Page 231)

Features of your vehicle
152 4
■ Voice Recognition Activation
• The voice recognition engine contained
in the Bluetooth ® Wireless Technology
System can be activated in the follow-
ing conditions:
- Button Activation
The voice recognition system will be
active when the
button is pressed
and after the sound of a Beep.
- Active Listening
The voice recognition system will be
active for a period of time when the
Voice Recognition system has asked
for a customer response.
• The system can recognize single digits
from zero to nine while numbers greater
than ten will not be recognized.
• If the command is not recognized, the
system will announce "PARDON" or No
input voice signal from microphone. (No
response)
• The system shall cancel voice recogni-
tion mode in following cases : When
pressing the
button and saying
"CANCEL" following the beep. When not
making a call and pressing the
button
0.8 second or longer. When voice recog-
nition has failed 3 consecutive times.
• At any time if you say "help", the system
will announce what commands are
available.
■ Menu tree
The menu tree identifies available voice
recognition
Bluetooth ® Wireless
Technology functions.
■ Voice Operation Tip
To get the best performance out of the
Voice Recognition System, observe the
following:
- Keep the interior of the vehicle as quiet
as possible. Close the window to elimi-
nate surrounding noise (traffic noise,
vibration sounds, etc), which may dis-
turb recognizing the voice command
correctly.
- Speak a command after a beep sound
within 5 seconds. Otherwise the com-
mand will not be received properly.
- Speak in a natural voice without paus-
ing between words.
The Bluetooth ® Wireless Technology icon
appears on the upper side of audio dis-
play when a phone is connected.
Pair phone
Select phone
Change priority
Delete phone
Bluetooth off
BT VOL
Setup
Add entry Phonebook
Change
Delete name
By Phone
By voice
Call By name
By number