Hyundai 2012 Santa Fe - Manual (Page 211)

Features of your vehicle
132 4
• Pairing a phone
Before using Bluetooth
® wireless tech-
nology features, the phone must be
paired (registered) with the audio sys-
tem. Up to 5 phones can be paired with
the system.
NOTE:
• The pairing procedure of the phone
varies according to each phone
model. Before attempting to pair
phone, please see your phone’s
User’s Guide for instructions.
• Once pairing with the phone is com-
pleted, there is no need to pair with
that phone again unless the phone
is deleted manually from the audio
system (refer “Deleting a Phone”
section) or the vehicle’s information
is removed from the phone.
➀
Press button to enter SETUP
mode.
➁
Select “PHONE”, then “PAIR PHONE”
in PHONE menu.
➂
The audio displays “Device : [Name]
passkey: 0000”
➃
Search and select the device name in
your mobile phone to starting the pair-
ing process.
NOTE:
• If the phone is paired with two or
more vehicles of the same model,
some phones may not handle
Bluetooth
® wireless technology
devices of that name correctly. In
this case, you may need to change
the name displayed on your phone.
For example, if the vehicles' name is
HMC CAR, you may need to change
the name displayed on you phone
from HMC_CAR to JOHNS_CAR or
HMC CAR_1 to avoid ambiguity.
Refer to your phone User’s Guide, or
contact your cellular carrier or phone
manufacturer for instructions.
• Connecting a phone
When the Bluetooth
® wireless technology
system is enabled, the phone previously
used is automatically selected and re-con-
nected. If you want to select different
phone previously paired, the phone can
be selected through “Select Phone” menu.
Only a selected phone can be used with
the hands-free system at a time.
➀
Press button to enter SETUP
mode.
➁
Select “PAIR PHONE”, then “SELECT”
in PHONE menu.
➂
Select desired phone name from the list
shown.
➃
The Bluetooth ® wireless technology
icon appears on the upper side of audio
display when a phone is connected.
SETUP
SETUP